UC-1381 Aliphatic waterborne polyurethane dispersion can be used for thick printing coatings in textile fields such as shoe materials and clothing

Model UC-1381

Type Aliphatic waterborne polyurethane dispersion

Apply It can be used for thick printing coatings in textile fields such as shoe materials and clothing.

Main Features – High solid content;

          – Good permeability;

– High elongation.

Product Specifications

Suggestions for use

Water-based can be added according to application requirements Isocyanate or aziridine crosslinking agent to further improve physical and chemical properties such as water resistance and adhesion. Construction conditions: 100-mesh screen printing, curing at 150°C for 2 minutes (drying conditions should be determined according to the actual application).

Save

at 5℃ to 35℃ Within the temperature range, this product can be stored stably for 6 months. This product is very sensitive to frost. Once frozen, it cannot be used again. Therefore, the storage stability must not be lower than 5°C; and the container must be fully sealed. If the water evaporates, it will form a film that cannot be redispersed.

Material Safety

Material Safety Data Sheet for this product Sheets are available upon request.