Diglycerin GY-22 JIN-G-20 Humectant, used in cosmetics, electrolyte, cutting fluid

Product Introduction

JIN-G-20 Yes Based on plant-derived glycerin, polyol polyether polymerized without PEG in the structure. This product has strong hygroscopicity and good moisturizing properties, and can be used as a moisturizer in cosmetics. This product can also be used in electrolytes and cutting fluids. In addition, this product can also be used as a PEG-free polyol to participate in chemical reactions for the preparation of various esters, ethers and other products.

Product Specifications

Packaging, storage

25kg or 200kg plastic drum . This product has a certain degree of moisture absorption and should be stored in a cool and ventilated place.

Shelf life

Unopened storage period 24 pieces moon.

Security Information

This product adopts simple It is generally not harmful when used under the condition of precautionary measures, and there is no special requirement for ventilation. If the skin comes into contact with the product, it should be washed thoroughly with water as soon as possible. Change heavily contaminated clothing and wash soiled skin. If the product gets into the eyes, immediately lift the eyelids and rinse thoroughly with plenty of flowing water or normal saline. If any redness, pain or discomfort persists in the eye, seek medical attention as soon as possible. If the product enters the mouth, spit it out in time and drink plenty of water at the same time. Seek medical attention immediately if swallowed in large quantities or if symptoms worsen.

Leak handling

When safe Stop the leak as much as possible. If minor leaks are found, treat with sand or other absorbent material and place in a clean, dry container for further disposal. If there is a large amount of leakage, the leaked material should be collected for subsequent treatment, and the site should be cleaned with water to prevent the material from flowing into the sewer or public waters, evacuate non-workers, isolate the area and prohibit non-workers from entering the site. All collected spilled materials should be disposed of in accordance with the relevant regulations of the local environmental protection department.

Disclaimer

The information provided above and Technical advice has been compiled with the utmost care, but no commitments are made here, even where third party proprietary rights are addressed. Before using our products, we recommend that they carry out a series of tests. The application, use, processing or production of products based on the technical information provided by us is beyond our control and therefore the responsibility for these lies with the user.