Products Overview
Bactericide DA-20 is a type of bacteria used to control industrial water systems , fungicide and algae growth fungicide. It has the desirable properties of rapid antimicrobial action and rapid breakdown into harmless by-products.
Products Parameters
Item | typical data |
Active ingredients | 2,2-Dibromo-3 – Nitropropionamide (DBNPA) |
Concentration | 20.0±0.5% |
Appearance | colorless to yellow transparent solution |
pH (1%) | 2.0-7.0 |
light gravity@25℃ | 1.200-1.250 |
Solubility | Soluble in water |
Stability | Stable for 6 months at 25℃ |
Bio Bactericidal Properties
DA-20 has a very broad activity spectrum against waterborne bacteria and fungi, Include the microorganisms listed below. It is capable of reducing bacterial counts by a factor of 5 in as little as 15 minutes.
Test bacteria | ||
bacteria | Model | Yeast |
Bacillus subtilis Enterobacter aerogenes Escherichia coli Klebsiella Proteus vulgaris |
Aureobasidium pullulans Aspergillus niger Fusarium oxysporum Penicillium chrysogenum Trichoderma viridis |
Candida albicans Saccharomyces cerevisiae Pseudomonas aeruginosa Salmonella choleraesuis Staphylococcus aureus |
Apply Methods of Programs and Applications
The biocide DA-20 is especially suitable for controlling pulp and paper mill process water, Microbial growth in cooling towers, heat exchangers and air conditioning systems. It can also be used for short-term protection of industrial products such as polymer dispersions, pigments and mineral slurries and wax dispersions.
The normal use concentration is in the range of 0.05-0.5%, depending on the protection product and the environmental conditions to which it will be exposed.
compatible Sex
If DA-20 is added at the same time with other preservatives, there may be an interaction . In this case, therefore, a separate analytical check for the stability of the active substance is recommended.
Before use, DA-20 must not be diluted or mixed with other raw materials, which may May adversely affect the performance of the active agent. Before using DA-20, the material compatibility of the system should be checked individually, such as the corrosion resistance of storage, transportation and dosing equipment. Prolonged or permanent contact with stainless steel increases the risk of pitting corrosion. Therefore, it is preferable to use plastic material.
Processing
Process product in a closed system. Store only in original, unopened container. The use of personal protective equipment such as chemical impermeable gloves, goggles, and a shield is strongly recommended. If product comes into contact with skin, wash off with water immediately. In case of eye contact, flush immediately with plenty of water and seek medical attention. This product should be stored at room temperature
Packaging
25kg and 200kg waterproof plastic containers.
Save
Storage and transportation, store at room temperature for 6 months;