3M FC 4432 Fluorocarbon Surfactant

Products Introduction

Compared with 4430, FC-4432 has higher fluorine content and lower surface tension. Soak less.

is a non-ionic polymeric fluorosurfactant, the surfactant As a coating additive, it is widely used in coatings and inks, which can make the coating obtain a very low surface tension, and this low surface tension can only be obtained when fluorine compounds are added. FC-4432 surfactant is an excellent wetting agent and leveling agent for various water-based, solvent-based and high-solid content coatings.
FC-4432 fluorosurfactant can dissolve and be compatible with most polymers, and can continue to function during the drying and curing process. When used in water-based polymer systems, FC-4432 fluorosurfactant can effectively reduce the interfacial tension between the water phase/organic phase and maintain surface activity in the organic phase of the polymer system. FC-4432 Fluorad is an improved product of fluorosurfactant FC-430. Compared with FC-430, FC-4432 has lighter color, smaller odor and lower viscosity.
While improving the wetting and leveling properties of the coating, FC-4432 can also improve the water resistance, oil resistance and stain resistance of the coating to a certain extent, and can also reduce the surface friction coefficient and improve the non-stick property.

Physics Nature                                           
(Unless otherwise specified, all parameter values ​​are measured at 25°C (77°F))

appearance yellow viscous liquid
specific gravity 1.17(9.75lbs./gal, 1.170kg/l)
Flashpoint 82℃ (180℉)
PH value (1% solution) 4.5
Boiling point 200℃ (392℉)
vapor pressure 0.0014 psi (0.07 mmhg)
viscosity (Brookfield,3 # ,6rpm):: 5500cps(4701centistokes)
Solubility in water can be dispersed in any ratio
Type non-ionic
Ingredient 100% fluoroaliphatic polymer fat


Apply

3M fluorocarbon surfactant FC-4432 active agent, wetting and leveling, Fluorinated surfactants, durable industrial coatings.

1. It is a non-ionic polymeric fluorine-containing surfactant. Active agents are widely used as coating additives in coatings and inks.

2. It is a non-ionic polymeric fluorine-containing surfactant. As a paint additive, the active agent can make the paint obtain a very low surface tension, and this very low surface tension can only be obtained when fluorine compounds are added.

Applied to many industrial and commercial coatings, including paints, resins, adhesives, inks, Coatings, floor coatings, and more!

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.chemhdi.com/archives/1544

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search
zh_CNChinese