Covestro Bayhydrol® U XP 2750 waterborne polyurethane dispersion

Features

Aliphatic hydroxyl polycarbonate polyurethane dispersion (without co-solvent)
Used as a binder in waterborne two-component polyurethane coating formulations

Supply Form about 43% In aqueous solution/dimethylethanolamine, the ratio is 56:1

Features Data

special Performance

• Excellent weather resistance
• Hard elastic scratch resistant coating
• Has good plastic adhesion
• Solvent free

Other Data

Features /application

Bayhydrol® U XP 2750 is a hydroxyl polycarbonate based polyurethane dispersion, It can be diluted with water to use viscosity. Can be combined with hydrophobic polyisocyanate (such as: Desmodur®N 3600, N 3900, XP 2730) or hydrophilic polyisocyanate (such as: Bayhydur304, 305, XP 2655) to prepare hard elastic Two-component polyurethane water-based coating. Two-component polyurethane waterborne coatings made of Bayhydrol® U XP 2750 have excellent weatherability (gloss retention, crack resistance), good appearance (high gloss, low haze) and excellent reflow properties (dry shaving/wet shaving). Bayhydrol® UXP 2750 is compatible with various polyacrylic acid dispersions (such as: Bayhydrol® A 145, A 2470, A 2601, XP 2645, XP 2695, XP 2770, XP 2801). Since there are many types of co-reactants to choose from, compatibility tests should be carried out one by one.

Save

– Store in Bayer MaterialScience original airtight containers.
– Recommended storage temperature: 5 – 30 ℃
– Protect from freezing, heat and foreign substances.
General information: This product is sensitive to freezing. Prolonged freezing can cause permanent damage to the product. Prolonged storage at elevated temperatures may result in a decrease in viscosity or increase in average particle size, and may also result in precipitation or condensation. Product viscosity is mainly affected by pH value. As the pH may drop during storage, the viscosity may also drop. A small amount of 10% dimethylethanolamine solution can be added to restore the original pH value. Contamination with certain bacteria, molds or algae may render the product unusable.

Save Time

Bayer MaterialScience declares that the product is stored in full compliance with the above “Storage” clause Where required and properly handled, the product complies with the specifications or characteristic values ​​stated in the above clause “Specifications or characteristic values” (as applicable) within 6 months from the date of shipment stated on the transport document. The fact that a product exceeds the aforementioned 6-month period does not mean that it no longer complies with the values ​​set forth in the specifications or characteristic values. However, Bayer MaterialScience recommends that products older than 6 months from the date of shipment be tested before use to verify that they still conform to the stated values ​​in the specification or characteristic values. Bayer MaterialScience makes no promises and accepts no responsibility or liability for failure to conform to specifications or values ​​set forth in Characteristic Values ​​for products older than 6 months from the date of shipment.