The long-term protective effect of bis-(2-dimethylaminoethyl) ether in anti-mold coatings

Introduction

Anti-mold coating is a special coating widely used in construction, furniture, ships and other fields. Its main function is to prevent the growth and reproduction of mold. As people’s health and environment requirements become increasingly high, the performance demand for anti-mold coatings is also increasing. As a highly effective anti-mold agent, bis-(2-dimethylaminoethyl) ether (hereinafter referred to as “bis-ether”) has been widely used in anti-mold coatings in recent years. This article will introduce in detail the long-term protective effect of bis ethers in anti-mold coatings, including its chemical properties, mechanism of action, product parameters, application cases, etc.

1. Chemical properties of bis-(2-dimethylaminoethyl) ether

Bis-(2-dimethylaminoethyl)ether is an organic compound with the chemical formula C8H18N2O. Its molecular structure contains two dimethylaminoethyl groups, connected by an oxygen atom. This structure imparts the unique chemical properties of the bis ether, which enables it to exhibit excellent properties in mildew-resistant coatings.

1.1 Physical Properties

1.2 Chemical Properties

Bi ethers are highly alkaline and can neutralize and react with acidic substances. In addition, bisethers also have good thermal and chemical stability, and can remain stable over a wide temperature and pH range.

2. The mechanism of action of bis-(2-dimethylaminoethyl) ether

The mechanism of action of bis ether in anti-mold coatings mainly includes the following aspects:

2.1 Inhibiting mold growth

Diesel ethers inhibit the growth and reproduction of mold by destroying the integrity of mold cell membranes. Specifically, bisethers can interact with lipids and proteins on the cell membrane of mold, causing the cell membrane to rupture, cell contents to leak, and ultimately leading to the death of mold.

2.2 Inhibition of mold metabolism

Diesel ethers can also inhibit the metabolic process of mold, especiallyIn particular, it inhibits the respiration and energy metabolism of mold. By inhibiting the metabolism of mold, bis ether can effectively reduce the activity of mold and extend the service life of anti-mold coatings.

2.3 Inhibiting the formation of mold spores

Diesel ethers can also inhibit the formation and diffusion of mold spores. Mold spores are the main way for mold to reproduce. Inhibition of spore formation and diffusion can effectively prevent the spread and spread of mold.

III. Product parameters of bis-(2-dimethylaminoethyl) ether

The application of bis ether in anti-mold coatings needs to be selected and adjusted according to specific product parameters. The following are common product parameters of bis ether in anti-mold coatings:

IV. Application cases of bis-(2-dimethylaminoethyl) ether in anti-mold coatings

4.1 Construction anti-mold coating

In architectural anti-mold coatings, the amount of bis ether is usually 0.5-1%. By adding bis ether, building anti-mold coatings can maintain anti-mold effect for a long time in humid and high temperature environments, effectively preventing the growth and reproduction of mold.

4.2 Furniture anti-mold coating

In furniture anti-mold coatings, the amount of bis ether is usually 1-1.5%. By adding bis ether, furniture anti-mold coatings can maintain anti-mold effect for a long time in a humid and airtight environment, effectively preventing the growth and reproduction of mold.

4.3 Ship anti-mold coating

In marine anti-mold coatings, the amount of bis ether is usually 1.5-2%. By adding bis ether, ship anti-mold coatings can maintain anti-mold effect for a long time in a high temperature, high humidity and high salt environment, effectively preventing the growth and reproduction of molds.

V. Long-term protective effect of bis-(2-dimethylaminoethyl) ether

The long-term protective effect of bis ether in anti-mold coatings is mainly reflected in the following aspects:

5.1 Long-term anti-mold effect

Bis ethers can maintain anti-mold effect for a long time, usually up to more than 5 years. Through long-term anti-mold effect, bis ether can effectively extend the service life of anti-mold coatings and reduce maintenance costs.

5.2 Broad-spectrum anti-mold effect

Diethers have a broad-spectrum anti-mold effect on a variety of molds, including Aspergillus niger, Penicillium, Trichoderma, etc. Through the broad-spectrum anti-mold effect, bis ether can effectively prevent the growth and reproduction of various molds.

5.3 Environmental Friendliness

Diethers are environmentally friendly and will not cause pollution to the environment. Through environmental friendliness, bis ethers can meet modern environmental protection requirements and are widely used in various anti-mold coatings.

VI. Precautions for the use of bis-(2-dimethylaminoethyl) ether

When using diether, you need to pay attention to the following aspects:

6.1 Safe Operation

Di ethers have a certain degree of irritation. Protective gloves, masks and other protective supplies should be worn during operation to avoid direct contact with the skin and eyes.

6.2 Storage conditions

Diethers should be stored in a cool, dry and ventilated place to avoid direct sunlight and high temperature environments.

6.3 Adding quantity control

The amount of bis ether should be controlled according to the specific use environment and requirements to avoid excessive addition, resulting in degradation of coating performance.

7. Conclusion

Bis-(2-dimethylaminoethyl)ether, as a highly effective anti-mold agent, exhibits excellent long-term protection in anti-mold coatings. By inhibiting mold growth, inhibiting mold metabolism, and inhibiting mold spore formation, bis ether can effectively extend the service life of anti-mold coatings and reduce maintenance costs. At the same time, bis ether has good environmental friendliness and can meet modern environmental protection requirements. In actual application, the amount of bis ether should be reasonably controlled according to the specific use environment and requirements to ensure the performance and use effect of anti-mold coatings.

8. Appendix

8.1 Chemical structure of bis-(2-dimethylaminoethyl) ether

 CH3
    |
CH3-N-CH2-CH2-O-CH2-CH2-CH2-N-CH3
    |
   CH3

8.2 Synthesis method of bis-(2-dimethylaminoethyl) ether

The synthesis method of bis ether mainly includes the following steps:

1. React dimethylamino group with ethylene oxide to form dimethylaminoethyl ether.
2. React dimethylaminoethyl ether with dimethylamino to form bis-(2-dimethylaminoethyl) ether.

8.3 Market prospects of bis-(2-dimethylaminoethyl) ether

As people’s health and environment requirementsAs the market demand for anti-mold coatings is increasing. As a highly effective anti-mold agent, bis ether has broad market prospects. In the future, with the continuous advancement of technology and the continuous expansion of applications, the application of bisexual ethers in anti-mold coatings will become more and more extensive.

9. Summary

The long-term protective effect of bis-(2-dimethylaminoethyl) ether in anti-mold coatings is mainly reflected in its excellent anti-mold effect, broad-spectrum anti-mold effect and environmental friendliness. By reasonably controlling the addition amount and use conditions of bis ether, it can effectively extend the service life of anti-mold coatings, reduce maintenance costs, and meet modern environmental protection requirements. In the future, with the continuous advancement of technology and the continuous expansion of applications, the application of bisexual ethers in anti-mold coatings will become more and more widely, providing people with a healthier and environmentally friendly living environment.

Extended reading:https://www.bdmaee.net/dabco-t-9-catalyst-cas29568-56-9-evonik-germany/

Extended reading:https://www.bdmaee.net/niax-d-50-tertiary-amine-catalyst-momentive/

Extended reading:https://www.bdmaee.net/dibbutyltin-monooctyl-maleate-cas25168-21-2-bt-58c/

Extended reading:https://www.newtopchem.com/archives/1025

Extended reading:https://www.newtopchem.com/archives/40218

Extended reading:https://www.bdmaee.net/2-4-6-trisdimethylaminomethylphenol/

Extended reading:https://www.bdmaee.net/fascat9201-catalyst-dibbutyl-tin-oxide-fascat9201/

Extended reading:https://www.bdmaee.net/neodecanoic-acid-zincsalt/

Extended reading:<a href="https://www.bdmaee.net/neodecanoic-acid-zincsalt/

Extended reading:https://www.bdmaee.net/wp-content/uploads/2022/08/115-13.jpg

Extended reading:https://www.bdmaee.net/wp-content/uploads/2022/08/33-6.jpg