Pump lubricating agent is a new product that has appeared in the concrete market. However, the market for pump lubricating agents is currently diverse and the products are uneven. So how to choose a good quality pump lubricating agent? ? In fact, it is very simple. Below, Xiao Gen will teach you how to distinguish good and qualified pump lubricants.
How to choose good quality pump lubricant:
1. Choose a qualified manufacturer When ordering from the manufacturer, the lubricating agent is composed of a variety of polymers. The general shelf life is two years. Please pay attention to the production date when purchasing.
2. Purchase products with good packaging. The packaging must be waterproof. If there is any damage to the packaging, you need to buy with caution, because the lubricant will dissolve when exposed to water and is impermanent. use.
3. How to check the effect of lubricant. First, use a steel pipe with a diameter of 130mm. Block one end of the steel pipe with an object, and then put the prepared lubricant into the pump. Pour the pump agent solution into the steel pipe, pour out the lubricant solution in a short period of time, and use the steel pipe. If there is a clear feeling that it is a qualified product.
The PH value of the pump agent is neutral
In fact, the main function of the pump agent is Before pumping the ready-mixed concrete, inspect the pipes of the pump truck to avoid clogging of the pump. In the past few decades, the ready-mixed concrete industry in various places has been using water and mortar to lubricate concrete pumps. The result is neither economical nor in line with the concepts of low-carbon environmental protection, energy conservation and emission reduction. The successful development and application of lubricant pumps has made a positive contribution to the low-carbon, energy-saving and emission reduction of the concrete industry. </p
微信扫一扫打赏
Chinese