It is understood that: Erucamide is an important derivative of erucic acid. It is an excellent fine chemical product with a wide range of applications. It is in the form of white granules or powder. Soluble in organic solvents such as ethanol and ether. The production method is obtained by ammoniation and dehydration of erucic acid and ammonia under the action of a catalyst. Erucamide, as an important derivative of erucic acid, is an excellent fine chemical product with a wide range of applications. Because it has a high melting point and good thermal stability (stable at 273°C), it is mainly used as an anti-sticking agent and slip agent for various plastics and resins, and an excellent lubricant and antistatic agent for extruded films. .
Erucamide can be used as an additive in the following films:
1. In LDPE (low density polyethylene), LLDPE (linear low density polyethylene) In the production of high-density polyethylene (HDPE) films, under high-speed shearing speeds, it can effectively prevent melt rupture, give the finished product outstanding openability, smoothness, brightness, antistatic properties, and anti-stickiness, and effectively prevent film gaps. It can significantly reduce the dynamic and static friction coefficients on the surface of the product, reduce the accumulation of dust on the surface of the film, and improve the processability and packaging efficiency. It also improves the waterproof and moisture-proof performance of the film. It is recommended to use it with powders such as talc powder. Use it for better results.
2. In CPP (polypropylene cast film), it can effectively prevent the adhesion of the product, improve the smoothness of the product and the feeling of smooth hand touch, and facilitate the smooth pulling of the film from the roller. It can also be used together with calcium stearate and silicon dioxide.
3. When producing BOPP (biaxially oriented polypropylene film), in order to increase the smoothness, anti-adhesion and antistatic properties of the product surface, the static and dynamic friction coefficients of the product surface are greatly reduced after adding , and also meets the high-speed AUTO packaging requirements.
4. Milk, soybean milk, soy milk, soy sauce, beverages and other liquid substances packaged by AUTO filling machines require that the packaging film is easy to open and the dynamic friction coefficient is ≤0.35. Only by adding oleic acid amide or erucic acid amide can the packaging film be easily opened. Meet the requirements and make the surface of the product smooth and bright.
5. Used in PO transparent and breathable granular materials (films) such as disposable tablecloths, disposable sheets, disposable children’s diapers, vegetable and fruit cling film, cargo packaging and covering films, which are smooth and smooth. , opening, anti-adhesive, anti-static and other functions.
6. Used as a slip agent for fruit netting (foamed PE), degradable film (sheet), PP corrugated porous material film (sheet), breathable and water-permeable film (sheet), etc. Brightener, anti-adhesive agent.
7. Used as an opening agent and slippery agent for HDPE (high-density polyethylene) packaging film. After adding it, the film becomes uniform in thickness and smooth in surface, which can prevent wrinkles on the film surface.
8. Used as IPP (anti-impact modified polypropylene), EVA (ethylene-vinyl acetate copolymer), EEA (ethylene-ethyl acrylate copolymer), PA (polyamide), etc. Ideal smoothing, opening and anti-blocking agent for films and gums.
9. Transparent rigid PVC films or sheets usually add organic tin (tin mercaptide) as a stabilizer. The melt with added organic tin has a strong tendency to stick, and it must be controlled. For adhesiveness, amide slip agents such as erucamide, oleic acid amide, stearic acid amide, and ethylene bisstearamide (EBS) must be added.
10. In multi-layer co-extruded films and high-transmittance agricultural films, the addition of this product can significantly reduce the friction coefficient of the film and produce films that feel smooth and bright. It can be used together with silica and calcium stearate for better effect, or it can be made into masterbatch.
11. Used as opening agent, slip agent, anti-sticking agent and antistatic agent for PS (polystyrene) film or sheet.
12. To make the friction coefficient of composite films (such as transparent PP composite films and PP pearlescent films) lower than 0.4, a slip agent (oleic acid amide or erucic acid amide) must be added. Generally, it should be added Its core layer (middle layer) allows it to migrate to the surface.
13. Used as smoothness, opening and anti-adhesion additives for ternary copolymer films.
14. Used as a new additive for filter paper (membrane).
15. PP inflated film has high requirements for smoothness. In the actual production process, erucamide and oleic acid amide are used together to achieve the ideal effect.
微信扫一扫打赏
Chinese