Covestro (formerly Bayer) Desmodur 2460M Liquefied MDI MDI-50 101-68-8

Product Features
Diphenylmethane diisocyanate monomer with high 2,4′-isomer content, stable against storage discoloration.
Prepolymer formulations for 1K and 2K polyurethane coatings and adhesives and related applications.
Desmodur® 2460M is a mixture of isomers of diphenylmethane diisocyanate monomer, liquid above 20°C.
Easier to store and handle than the 4,4′-isomers (eg Desmodur® 44M, Desmodur® 44MC) which are solid at room temperature.
Supplied form is solvent-free, colorless to yellow low viscosity liquid above 20°C and crystallizes at lower temperatures.

Specifications

*This data is general information and is not part of the product manual.

Processing
It is imperative to ensure that all containers – including empty ones – are always airtight. Most importantly, since Desmodur® 2460M reacts with water to form polyurea and carbon dioxide, it must be protected from contact with water. During storage, sampling, transfer and processing of Desmodur® 2460M, moisture must be prevented from ingress in any form (wet containers, anhydrous solvents, moist air), otherwise, the carbon dioxide produced will lead to a pressure increase in tanks and containers high and dangerous. Furthermore, the formation of polyurea in Desmodur® 2460M may cause turbidity and solid deposits which can clog filters, pumps and lines.

Save
– Store in original Covestro airtight container.
– Recommended storage temperature: 20~40℃.
– Keep away from moisture, heat and foreign substances.

When the product is stored in full compliance with the requirements of the above “storage” clause and handled properly, the product complies with the above “specifications or characteristics within 6 months from the date of shipment stated on the transport document Specifications or characteristic values ​​stated in the clause “Values”, as applicable. If the product exceeds the above-mentioned 6-month period, it does not mean that it no longer meets the set values ​​in the specifications or characteristic values. However, it is recommended that products older than 6 months from the date of shipment be tested before use to confirm that they still comply with the values ​​set in the specifications or characteristic values. The manufacturer does not make any promises for products that have been shipped more than 6 months from the date of shipment, and does not assume any responsibility and liability for non-compliance with specifications or set values ​​​​in the characteristic values.

00pt; margin-right:0.0000pt; text-align:left”> Save
– Store in original Covestro airtight container.
– Recommended storage temperature: 20~40℃.
– Keep away from moisture, heat and foreign substances.

When the product is stored in full compliance with the requirements of the above “storage” clause and handled properly, the product complies with the above “specifications or characteristics within 6 months from the date of shipment stated on the transport document Specifications or characteristic values ​​stated in the clause “Values”, as applicable. If the product exceeds the above-mentioned 6-month period, it does not mean that it no longer meets the set values ​​in the specifications or characteristic values. However, it is recommended that products older than 6 months from the date of shipment be tested before use to confirm that they still comply with the values ​​set in the specifications or characteristic values. The manufacturer does not make any promises for products that have been shipped more than 6 months from the date of shipment, and does not assume any responsibility and liability for non-compliance with specifications or set values ​​​​in the characteristic values.