Thermosetting acrylic resin CB-89 for electroplating varnish

This product is for vacuum plating, water electroplating Cr and Ni, or in Stainless, etc. The developed 2K-PU topcoat has the characteristics of excellent adhesion, good dye compatibility and good alcohol resistance.

Apply
(1). Electroplating Cr, Ni and real aluminum on ABS material Top 2K-PU Varnish

(2) 2K-PU Varnish on Stainless TPA-100 specification (NV:100%, NCO% 23.1); Thinner composition: MEK/DIBK/TOL/BAC=4/3/2/1(Wt.)
Main agent/hardener/thinner=10/1/5(Wt.)
NKⅡ 8″~ 8″5 Spraying Baking conditions: 65℃/1 hour; coating film Performance: close OK

Thinner composition: MEK/DIBK/TOL/BAC=4/3/2/1(Wt.); Main agent/hardener/thinner=10/1/6(Wt.)

NKⅡ 8″~ 8″5 spray Baking conditions: 80℃/1 hour ; Coating performance: resistant to boiling water for 1 hour, appearance and adhesion OK

>

DBTDL(10%)

0.05

0.5

Thinner

16.0

Total

40 . 0

4.0

Thinner composition: MEK/DIBK/TOL/BAC=4/3/2/1(Wt.); Main agent/hardener/thinner=10/1/6(Wt.)

NKⅡ 8″~ 8″5 spray Baking conditions: 80℃/1 hour ; Coating performance: resistant to boiling water for 1 hour, appearance and adhesion OK