Don’t do porcelain work without diamonds, sometimes it’s better The house was destroyed because the workers were not good at their craftsmanship. Recently, a fan asked me that I was installing a door at home, but the door frame was 6 centimeters shorter than the door opening. As a result, the workers did nothing but drilled into the gap. >Foam caulk, I raised questions at the time, but the reply I received was: This is how it is done! NowheI would like to ask if this approach is really reliable?
There is a gap between the door frame and the door opening. This is understandable. Finished doors are all installed in this way. There is a gap of about 1 cm between the door frame and the door opening. This 1 cm gap It is used to adjust the vertical space for the door frame (the wall may not be vertical) and for gluing. If you do not apply foam caulking , the impact force of the door on the door frame when opening and closing will cause looseness between the door frame and the wall. Over time, the door will become shaky.
But if it is 6 cm, just punch into the gap Foam caulkNo The only solution to the problem is that the room door is not fixed with door gap filler.Foam caulking agent is only an auxiliary agent. Over time, external forces may appear. , by that time the door frame will deform and sink, and it will be over. The correct approach is: do not apply foam caulkingBefore, put wooden blocks in the gap to make it firm, and then let the masonry master repair it Cement, wait for the cement to dry before applying paint.
But nowfoam caulk has been marked, so how to solve it? If you don’t want to dismantle the door and reinstall it, you can only try to make up for it by using a few keels to lay the bottom, and then seal it with gypsum board, which may be stronger.
In addition, the reason why the door frame is so much shorter than the door opening is that we were careless when customizing the door. The size is determined by the merchant, and the carpenter does the construction. The merchant should communicate with the carpenter when measuring. Now that this situation occurs, the merchant is definitely responsible. The correct approach is to return the product immediately and redo it.
微信扫一扫打赏
Chinese