How to use foam caulk? It is important to pay attention to these 4 points

Foam filling Caulking agenthas the effect of filling, sealing and waterproofing , the field of use is also very wide. It can be used in homes and industrial manufacturing. Foam caulkUsage is very important. If the operation steps are not standardized, the bonding effect will be affected. Foam caulkHow to use it? Foam caulkWhat is the correct way to use it?

1, use ;font-size:19px”>Foam caulk<font face Before installing, you need to observe the construction surface. If there is dust or fine soil, it needs to be wiped off, and then spray some water on the surface. Putfoam caulkShake it a few times to operate the construction. Gloves and protective masks are required during construction.

2、Foam caulkOnly after spraying and curing can the waterproofing and sealing effects be achieved. There is no need to get it on your clothes or hands before it solidifies. The higher the temperature, the shorter the curing time. If the temperature is lower, curing will take more time. The optimal construction temperature is between 18to25 degrees. If the temperature is higher If it is low, you can first apply foam caulkJust preheat.

3、Foam caulkDuring construction, you need to use a matching glue gun. Hold the middle of the can with your hand, and then gently pull the handle of the gun. Once the material is sprayed out, you can continue the construction. During construction, the jar needs to be turned upside down, and only half of the object needs to be filled when spraying, because it will expand after curing, and the excess can be scraped off with a tool before it is completely cured. Generalfoam caulking agentIt only takes about 4 hours to cure at constant temperature , poor quality will be delayed. Therefore, in order to ensure the progress of the project, it is best to choose high-quality foam caulking Agent, such asShanghai Weigu, focusFoam filling The research on seaming agents can provide customized products according to different industries. Foam caulkapplication solutions, quality guaranteed and environmentally friendly.

4. After use, the glue gun needs to be cleaned with plenty of water to facilitate next use. The remainingFoam caulkneeds to be sealed, otherwise it will volatilize and solidify, causing waste. GeneralFoam caulkare750ML , in order to avoid waste, you can choose to buy small sizesFoam caulk.

AboutFoam caulkThe methods are the above. During construction, whether it is domestic construction or industrial operations, you need to wear a gas mask, because some pungent odors will be emitted during the construction process.