As the air pollution problem becomes increasingly serious , the application of high-efficiency air filters in industry is becoming more and more common. However, if the installation is not reasonable, the filtration efficiency of the junior high-efficiency air filter may be reduced. The following are some considerations during installation:
1. When installing the air filter, you must strictly follow the installation instructions. The arrows on the filter frame indicate the direction of air flow. When installing, make sure the arrow is consistent with the actual air flow direction. If vertical installation is required, the crease direction of the internal filter paper should be perpendicular to the ground. When installed, the galvanized mesh should be behind the air outlet, and the length of the bag air filter should be perpendicular to the ground.
2. If you need to install an air filter in a clean room, try not to use wooden frame boards to prevent bacteria from growing and affecting indoor air quality. When installing, pay special attention to the sealing between the air filter and the rack. face=”宋体”>Ensuresealed Noneleak to ensure the filtering effect of the equipment. If the ambient temperature is high, required font>Use a high-temperature-resistant air filter.
3. Air filter Do not open the packaging bag before installation or film to avoid damaging the device, and store in the direction indicated on the box. Be careful when transporting to avoid damaging the air due to severe vibration and collisionFilter. For high-efficiency filters, the installation direction of the pipe must be correct; in addition, when the corrugated plate combined filter is installed vertically, the corrugated plate must be perpendicular to the ground.
The article comes from Shanghai Weigu Chemical Products Co., Ltd., Shanghai Weigu is a domestic manufacturer of high-efficiency filter potting glue. It focuses on quality and service and looks forward to cooperating with you.
微信扫一扫打赏
Chinese