Special plastering mortar for inorganic insulation board

1. Product introduction:
Special plastering mortar for inorganic insulation boards is a dry powder material made from high-strength and high-modulus fibers, organic compounds, inorganic materials and additives, ground by special equipment, and can be opened on site. Add water and it’s ready to use.
2. Product characteristics:
1. It has the characteristics of plasticity and low dry shrinkage, which can reduce the early plastic shrinkage cracks of mortar and improve the permeability, frost resistance and wear resistance of mortar and hardened body. , thereby inhibiting the generation and development of micro-cracks in the plaster mortar, thus playing the roles of waterproofing, cracking, shrinkage reduction, toughening, and strengthening.
2. It has excellent bonding performance and adopts dry slurry method for construction. It does not need to be watered and moistened on the bottom ash surface of the wall, and it can also meet the requirements of firmness, stability and durability of the wall plaster layer, thus It not only facilitates construction, but also overcomes the disadvantages of traditional construction methods that are difficult to control the wall from cracking, hollowing, and falling off due to dry-wet cycles. It also ensures and improves the construction quality of the plastering project.
3. Excellent construction workability. That is to say, the workability is very good, and the mortar will not cause bleeding and segregation, which greatly facilitates the construction operation and can fully protect the wall.
4. It has excellent water retention and can basically retain the water required for cement hydration in the cement mortar. The good water retention properties allow the cement to be fully hydrated and increase the strength of the cement. It is suitable for use in dry climate conditions. This water retention is particularly useful for mortars constructed under or on highly absorbent substrates.
5. It has high lubricity, is easy to construct, has less dust on the ground during construction operations, and has a certain water-reducing effect, which can reduce the water consumption of the mortar, which can significantly reduce the dry shrinkage of the mortar.
6. It has moderate toughness mechanical properties, and its tensile strength, bonding strength, toughness, impact resistance, frost resistance, wear resistance and other properties have been significantly improved, greatly improving the wall resistance. Crack, impermeability and strain resistance.
7. It has the characteristics of convenient transportation, no pollution to the environment, reliable quality, simple construction, environmental protection, and project cost saving. .
3. Dosage and ratio:
Dosage: It is recommended that the thickness of the plastering surface is 3~5mm, and the reference dosage is 5~6kg/㎡.
Materials: water = 4:1
4. Packaging and storage:
This product is packed in lined film bags, 50kg/bag. The unopened bag is valid for three months in a dry environment. . </p