Super strong grouting agent for stone

1. Product introduction:

Brand stone super-strength grouting agent is a newly developed product based on special inorganic materials, mineral powder and several imported auxiliary materials for the purpose of weak bonding and cavities on the back of stone. It is compounded by grinding and grinding agent. It is a new product specially used for stone pasting and back grouting. It has the characteristics of no shrinkage, high strength, high flow, excellent adhesion, no whitening, ready to use after adding water, easy to use, and high quality and efficiency.

2. Scope of application:

This product is suitable for wet hanging grouting of stone and filling grouting material for handicrafts.

3. How to use

1. Thoroughly clean the dust and surface of the original building. The back of the stone should be kept clean and odorless, and the back should be moist.

2. Break the super strong stone grouting material and add it to the mixing container. Mix the slurry 4:1 with water evenly. There should be no lumps of dough. (You can also add water to adjust according to the consistency) Do not use large amounts of water. The slurry should be thick paste.

3. When using, first pour 1/3 of the height of the stone, and then pour 80% of the height again after 30 minutes. After the last layer of slurry has solidified (about half an hour), that is A second layer of stone can be laid.

4. Packaging and Storage

This product is packed in a 25kg sealed paper bag. It should be waterproof and stored in a cool and dry place. The shelf life is three months. </p