Colored floor mortar

1. Product features:
1. It has excellent fluidity, automatically levels the ground, is non-slip, wear-resistant, ready to use after mixing with water, and is simple and quick to construct.
2. Improve the density and hardness of the base layer, improve the homogeneity and provide sound insulation.
3. Rapid setting and early strength, put into use after 1-2 days, low shrinkage, prevent cracking.
4. It is also suitable for heating floors with temperatures up to 50°C.
2. Scope of application:
This product is suitable for commercial and civil buildings laying colored floors, warehouses, elastic floors, carpets, and wooden floor underlays.
3. Construction method:
Base layer treatment: The base layer of inorganic non-metallic materials should be hard, flat, dry and clean. No cracks, no grease and no release agents.
1. If the surface of the base layer is loose or has a large area of ​​floating slurry, it should be shot blasted;
2. If the base layer is uneven in a large area, it must be polished with a ground grinder;
3. Before primer coating, Clean thoroughly with a vacuum cleaner.
4. Dosage:
It is about 1.6-1.8kg/m2 per square meter (the pouring thickness is determined according to the design). Generally, the thickness of the grout is about 3mm (i.e. 5.0-5.4kg/m2). The actual dosage is based on Depends on the level of the ground.
V. Notes:
1. The conditions of the base to be constructed will directly affect the amount of self-leveling construction, and must be carefully tested in advance and properly handled.
2. During construction, there should be no excessive ventilation indoors.
3. There are certain differences in the construction methods of heating floors.
6. Packaging and storage:
This product should be moisture-proof and sun-proof. Each bag is 25kg and the shelf life is six months. </p