To avoid moisture resurgence, it is not recommended to use gypsum mortar for the first layer. It is recommended to use gypsum mortar with caution in southern areas. It is recommended to use natural stucco, light stucco and desulfurized stucco, but not heavy stucco and apatite. The wall surface should be clean and free of oil stains and floating sinks. The loose and weathered parts of the old wall should be removed, and the protruding parts of the surface larger than 10mm should be leveled. The thickness of the first layer of insulation shall not exceed 10mm, the thickness of each layer of insulation slurry shall not exceed 20mm, and the interval shall not exceed 24 hours.
Light lime mortar is only used in masonry projects, with low strength and dry environment; mixed mortar not only has good workability, but also can be formulated into masonry mortars of various strength levels. In addition to masonry requiring high water resistance, it can also be widely used in various masonry projects.
Before gypsum construction, the base layer should be cleaned and permeable putty should be poured before applying putty. Pay attention to the proportion of concrete to ensure that the cement mortar and the concrete floor are firmly bonded; the putty should be compacted in layers. The actual operation of baseboard and wall construction must be cautious, and the hoisting and straightening of lines must be done carefully.
The wall of lightweight gypsum mortar is thinner than cement mortar, at least 5 times less than cement mortar. The enterprise square meter has a sizing rate far exceeding that of cement mortar. If you choose to use a machine to spray gypsum mortar, its feeding efficiency is more than three times that of manual production, which can further increase the construction speed and shorten the construction period.
</p
微信扫一扫打赏
Chinese