High-efficiency concrete release agent (liquid)

1. Product Content
High-efficiency concrete release agent is a water-based emulsion specially processed from a variety of film-forming materials and special additives. This product is easy to demould, does not corrode the steel plate, and has a good protective effect on the mold. After demoulding, the surface of the concrete component is smooth, beautiful in shape, and has small bubbles. It is especially suitable for demoulding of formwork that has higher requirements on the concrete surface. The use ambient temperature It should be above zero degrees Celsius. This product is safe, non-toxic and has no environmental pollution. The use effect is better than genuine engine oil.

II. Technical indicators
Appearance: white thick emulsion PH: 7-8 Specific gravity: 0.98 Specific gravity: 098
Fineness: 1-2um Film-forming temperature: not less than 0 degrees Emulsion stability: no delamination and segregation for half a year

3. How to use
First remove the adherents and impurities on the template surface, then spray or brush the release agent evenly on the mold surface , Coating amount: 200 grams/square meter. After coating, rainwater should be prevented. After the coating film dries, concrete can be poured normally. If the mold is made of wooden plywood, the release agent should be carefully applied twice and allowed to dry when used for the first time. This product can be used by adding water according to the situation.

IV. Packaging and Storage
1. This product is packed in plastic barrels, 25kg per barrel. Shelf life is one year.
2. The product will be stratified during the storage period. It can be used after a little stirring and it will not affect the film removal effect. </p