After years of inspections in front-line construction and technical experts’ continuous innovation of product technology, the new generation of Yulong pump truck lubricant is a very mature product and is the best companion for concrete pump trucks. As a country with major infrastructure construction, our country has a very large demand for resources and energy. Therefore, it is urgent for Chinese people to use new energy-saving and environmentally friendly products to replace the original construction techniques. Today, as an industry insider, the editor will give you a detailed explanation of the function of the pump truck lubricant and the precautions when purchasing.
Instructions for use of the lubricant on the pump truck
1. The function of the concrete pump truck lubricant The main purpose is to lubricate the pipelines of concrete transportation equipment, ground pumps, and truck pumps before operation to prevent the concrete pump truck from clogging the pipeline when pumping concrete, causing unnecessary economic losses and material waste. The traditional pump lubrication method uses cement mortar to lubricate the pump. In addition to increasing construction costs, it is neither environmentally friendly nor a waste of resources. Traditionally, 1 cubic meter of cement mortar is needed to moisturize a delivery pipe within 50 meters. Generally, ground pumps may require 2 to 3 cubic meters of cement mortar for longer pipes. According to the construction requirements, cement mortar cannot be poured directly into the structure. Generally, it is difficult to use cement mortar in early construction. During the construction, some irresponsible construction units and workers poured cement mortar directly into the structure, which greatly affected the project. Quality, causing unnecessary safety accidents with disastrous consequences. Such accidents abound. Responsible construction units and workers strictly followed the construction requirements during construction and placed cement mortar outside the formwork. According to a building with 30 floors, one floor is calculated as four constructions. Each pumping of cement mortar is calculated as 2 cubic meters. One floor is equivalent to wasting 8 cubic meters of cement mortar. A 30-story building is built to waste 240 yuan. Cubic cement mortar. This is just the editor’s rough estimate, and the actual result is far more than the editor’s estimate. It can be seen that resources are wasted. From an economic point of view, one cubic meter of cement mortar transported from the concrete mixing station to the construction site is calculated as 230 cubic meters. The cost of using the lubricating pump for a building after it is built is not a small sum. number. Now there is a new pump lubrication product on the market, the “pump truck lubricant” is both environmentally friendly and energy-saving. The cost is only one-tenth of the original lubrication pump, which can solve the problem of lubrication of the pump before the pump truck operation. The editor hopes that through the above analysis and explanation, more construction units will improve their awareness of environmental protection, truly implement scientific construction, protect nature, and cherish the environment starting from you and me!
2. Today’s lubricant market There are a variety of products and product quality varies. Today I will teach you how to distinguish good and qualified pump truck lubricants, mainly from the following aspects.
1. Choose a qualified manufacturer to order. The lubricant is composed of a variety of polymers. The general shelf life is two years. Please pay attention to the production date when purchasing.
2. Purchase products with intact packaging. The packaging must be waterproof. If the packaging is damaged, be careful when purchasing, because the lubricant will dissolve when exposed to water and cannot be used normally.
3. How to check the lubrication effect of the lubricant, first prepare a steel pipe with a diameter of 130mm, block one end of the steel pipe with a suitable object, and then pour the prepared lubricant solution into the In the steel pipe, pour out the lubrication solution in the shortest time and touch the inner wall of the steel pipe with your fingers. If there is an obvious sense of lubrication, it is a qualified product. </p
微信扫一扫打赏
Chinese