What is the best thing to use to lubricate the pipes of pump trucks?

Regarding the topic of what is better for lubricating pump trucks, I think everyone has to understand it from the following two aspects. Once you understand it clearly, you will have a new understanding and you can get what you want to know. Why do pump tubes need lubrication?

Pump truck pump pipes need to have excellent wear resistance and high pressure resistance, so the material used to produce pump truck pump pipes is not ordinary steel, but made of special steel. Although the inner wall of the pump tube is very smooth, it will still be very astringent and has a strong water absorption capacity. If the pump tube is directly pumped without lubrication, the water-cement ratio of the concrete will drop rapidly. When the water-cement ratio drops, To a certain extent, the fluidity of concrete will become poor, and if the fluidity is poor, it will cause pipe blockage.

How to solve the problem of lubrication?

When we understand the principle of why pump tubes need to be lubricated, it is the choice of lubricating materials. The most primitive method of lubrication is to use cement mortar. There are many disadvantages to lubrication with cement mortar, which are mainly reflected in the following aspects: high cost, lack of convenience, not environmentally friendly, and poor lubrication effect. Cement sand paddle pipe moistening has so many disadvantages, why are there still many construction sites using this method? In fact, this is a “concept change issue” and “interest chain issue.” Since there are so many disadvantages, is there a material that can replace sand paddle moisturizing materials? Here I would like to recommend a new type of concrete pump truck lubrication material, “Yulong pipe lubrication agent”. “Yulong pipe lubrication agent” is produced from polymer materials. A good lubricating agent can completely replace the sand paddle lubricating agent. It has many advantages. For example, the lubricating effect is very significant and can be used on all pumping equipment. In fact, its biggest advantage is that it saves money, time, effort, environmental protection, and high efficiency! Saving money during project construction is the most important thing, and I believe that the construction unit will put it first. </p