Pump truck lubricant is a new product appearing in the concrete market. Its main function is to lubricate the pipes of the pump truck before pumping ready-mixed concrete to avoid clogging of the pump. In the past few decades, the ready-mixed concrete industry across the country has been using water and mortar to lubricate concrete pumps. The result is neither economical nor in line with the concepts of low-carbon environmental protection, energy conservation and emission reduction. The successful development and application of pump truck lubricant has made a positive contribution to the low-carbon, energy-saving and emission reduction of the concrete industry.
Chinese name
Concrete pump truck lubricant
Abbreviation
Pump truck lubricant
Function
Lubrication of the pumps of the pump truck
Active role
Low -carbon and energy -saving and emission reduction in the concrete industry
Directory
1 Scope of application
2 Product features
3 How to use
4 Key points of use
Scope of application
Pump truck lubricant products are suitable for lubricating on-site pump pipes for pumping concrete and various dry mortars. It has good adaptability to various grades of concrete and replaces the pump mortar of various pump pipes. Pump Runtong products can avoid pump clogging accidents of concrete pumps and on-site mortar pumps, reduce transportation vehicles, improve equipment utilization, and reduce the use costs of enterprises using ready-mixed concrete and ready-mixed dry mortar. The use of pump truck lubricant products saves time, effort and worry. It is a new pumping construction technology.
Product Features
Pump truck lubricating agent can significantly improve concrete pumping capacity, reduce pipeline friction and pipeline resistance, significantly extend the service life of pump pipes, replace pump lubricating mortar, reduce processes, and shorten It has the advantages of rust prevention, speed, convenience, environmental protection, and money saving. Using the Pump Runtong product once can save about 230 yuan in pump mortar and transportation vehicle costs. Calculated based on the annual output of 200,000 cubic meters of concrete and 100,000 cubic meters of ready-mixed mortar. If the pump is opened 2,600 times per year, approximately 2,600 yuan can be saved in one year. 600,000 yuan.
Instructions for use
Before concrete pumping construction, first take the required amount of clean dissolved water and pour it into the container, then slowly add the pump truck lubricant and stir until it is completely dissolved. Then let it sit for 3-5 minutes, stir again and use. When using a truck pump to pump concrete, slowly pour the prepared Pump Runtong solution into the hopper along the inner wall of the pump truck hopper, and then start to slowly pour concrete into the hopper. After the concrete covers the feed port of the delivery pump, you can Start pumping concrete and ready-mixed mortar under pressure. The method is the same when using ground pumps and mortar pumping equipment.
Pump truck lubricating agent dosage table
Transmission pump tube length
Product dosage
Dissolved water dosage
Under 50 meters
1 bag
30±2 kg
50 meters-100 meters
2 bags
60±5 kg
100-200 meters
3-4 bags
140±10 kg
Usage Points
First, make sure that the pump pipes and connecting parts of the truck pump, ground pump, and mortar pump are sealed and have no leakage points; Residues, debris and other blockages;
3. When pumping concrete, the pump truck lubricant solution should be discharged outside the concrete formwork first, and remember not to pour it into the concrete structure;
4. Concrete pumps and After the mortar mixing pump is completed, the pump pipe and pump truck should be flushed with clean water in time; 5. Protective glasses should be worn when using this product. If the product solution is accidentally sprayed into the eyes, rinse immediately with plenty of water.
Pump truck lubricant is a new product appearing in the concrete market. Its main function is to lubricate the pipes of the pump truck before pumping ready-mixed concrete to avoid clogging of the pump. In the past few decades, the ready-mixed concrete industry across the country has been using water and mortar to lubricate concrete pumps. The result is neither economical nor in line with the concepts of low-carbon environmental protection, energy conservation and emission reduction. The successful development and application of pump truck lubricant has made a positive contribution to the low-carbon, energy-saving and emission reduction of the concrete industry. The Chinese name of concrete pump truck lubricant is abbreviated as pump truck lubricant. Its function is to lubricate the pipes of pump trucks and play a positive role in low-carbon, energy-saving and emission reduction in the concrete industry. Catalog 1 Application Scope 2 Product Features 3 Usage Method 4 Usage Points Application Scope Edit Pump The lubricating agent product is suitable for lubricating on-site pump pipes for pumping concrete and various dry mortars. It has good adaptability to various grades of concrete and replaces the pump mortar of various pump pipes. Pump Runtong products can avoid clogging of concrete pumps and on-site mortar pumps.
</p
微信扫一扫打赏
Chinese