Anhui Yulong JH——RB pipe moisturizer

Anhui Yulong pipe lubricant is a new product currently appearing in the concrete market. Its main function is to lubricate the pipes of the pump truck before pumping ready-mixed concrete to avoid clogging of the pump. In the past few decades, the ready-mixed concrete industry across the country has been using water and mortar to lubricate concrete pumps. The result is neither economical nor in line with the current concepts of low-carbon environmental protection, energy conservation and emission reduction. The successful development and application of concrete pipe moistening agents has made a positive contribution to the low-carbon, energy-saving and emission reduction of the concrete industry.
Scope of application

Pump truck lubricating agent products are suitable for lubricating pumps on site pump pipes for pumping concrete and various dry mortars. It has good adaptability to various grades of concrete and completely replaces the pump mortar of various pump pipes. Pump Runtong products can avoid pump clogging accidents of concrete pumps and on-site mortar pumps, reduce transportation vehicles, improve equipment utilization, and reduce the use costs of enterprises using ready-mixed concrete and ready-mixed dry mortar. The use of pump truck lubricant products saves time, effort and worry. It is a new pumping construction technology.
Product Features

Dissolve quickly: This product is made of high-purity raw materials and can dissolve quickly within 60 seconds. During use, you only need to use the swing valve of the pump truck to reverse the pump. Swing it back and forth 3 to 5 times to dissolve it into a glue-like moistening solution without the appearance of floc, and the solubility is higher than 99.9%.

High molecular weight: This product uses imported high-purity raw materials and advanced compound production technology to strengthen the surface tension of the solution, increase the viscosity, and form highly adherent ions on the inner wall of the pump tube. The protective layer also has good pipe sealing, filling and lubricating effects, and can protect the eyes after long-term use. Effect of cutting rings and pump tubes.

Neutral PH value: This product has a neutral PH value and does not produce any chemical reaction with the concrete itself. It is non-corrosive to steel bars and has no effect on the strength of concrete.

Guarantee the quality of the project: The use of this product can effectively avoid the occurrence of engineering quality phenomena such as cracks in the board structure and “hollowing out” of load-bearing components caused by the use of pump mortar, and can also avoid the occurrence of concrete pump blockage accidents. . At the same time, it can reduce transportation vehicles and improve equipment utilization. Reduce the operating costs of ready-mix concrete companies.

How to use

Anhui Yulong tubing moisturizer is a 300g instant tubing moisturizer. Before concrete pumping construction, first take the required amount of clean dissolved water and pour it into the hopper, then slowly add the pump truck lubricant, stirring while adding (you can open the pump truck swing valve to make the pump truck swing valve reverse in the hopper. Swing the pump back and forth more than 3 times) until all is dissolved. Then turn on the positive pump, pump out the solution in the pipe, and at the same time dump the concrete into the hopper and complete the pumping operation. The method is the same when using ground pumps and mortar pumping equipment. After the pumping operation is completed, the pump pipe and pump truck should be flushed with clean water in time.
Key points to note

1. First, ensure that the pump pipes and connecting parts of the truck pump, ground pump, and mortar pump are sealed and have no leakage points;

2. After checking the pump pipes of the pump truck, use Rinse the pump with clean water to ensure that there are no residues, debris or other blockages in the pump tube;

3. When pumping concrete, the pump truck lubricant solution should be discharged outside the concrete formwork first, and remember not to pour it into the concrete structure Medium;

4. After the concrete pump and ready-mixed mortar pump are pumped, the pump pipes and pump trucks should be flushed with clean water in time;

5. Wear protective gear when using this product Glasses. If the product solution is accidentally sprayed into the eyes, rinse immediately with plenty of water. </p