BYK SILCLEAN 3720 silicone surface additive

BYK -SILCLEAN 3720

A silicone surface additive that improves the easy-to-clean performance of water-based coatings. Contains hydroxyl functional groups, cross-linked for permanent easy-to-clean effect.

Chemistry Composition

Polyether-modified polydimethylsiloxane solution containing hydroxyl groups.

Typical Materialized data

The data given on this data page are only typical values, not the technical indicators of the product.

Storage and shipping

Storage and transport between 0 ℃ and 40 ℃.

Apply Domain

paint Industry

Features and advantages: The strong interfacial activity of the additive will cause the additive to spontaneously Migrate to the surface of the paint. In addition, it also contains OH functional groups, which can cross-link with the corresponding binder. If the additive is fixed on the surface of the coating through its reactive functional groups, the special properties it brings are long-lasting.

BYK-SILCLEAN 3720 can increase the hydrophobicity and Oleophobic. In addition, the additive can also reduce the dustiness of the paint film and improve the ease of cleaning of the paint film. The additive improves substrate wetting, leveling, surface slip, water resistance (anti-blush), anti-blocking and weathering properties of coatings. We therefore recommend that no other surface additives be added when evaluating BYK-SILCLEAN 3720. If other leveling additives are required, they should be added during the second test phase. BYK-SILCLEAN 3720 can also be used to improve the anti-graffiti and tape release properties of coating films.

Recommended Purpose

BYK-SILCLEAN 3720 is hydroxyl functional and recommended for waterborne topcoats. Can be crosslinked with the following resin systems: 2K polyurethane, alkyd/melamine, polyester/melamine, acrylic/melamine and acrylic epoxy blends.

Recommended Dosage

2-6% additive dosage (as supplied) based on total formulation.

The above recommended dosage is for reference, the optimal dosage needs to be determined through a series of experiments .

Join Methods and processing instructions

This additive is recommended to be added in the final stage of production, the mixing process needs to ensure enough shear rate.

special Reminder

If the additive is used in a cross-linkable resin system, then in heavy Sanding needs to be done evenly and thoroughly to ensure adequate intercoat adhesion.