BYK 310 silicone surface additive

BYK-310

for solvent-free and solvent-borne coating systems, printing inks Silicone-containing surfaces for adhesive systems and room temperature curing plastic systems
Surface additives that significantly reduce surface tension. Thermally stable up to 210 °C

chemical composition

polyester modified polydimethylsiloxane solution

typical materialized data

The data given on this data page are typical values ​​only, not Product technical indicators.

Storage and Shipping

The temperature is below 5 °C May develop stratification or cloudiness, Heat to 20 °C and mix well.

Application Information

Paint Industry

Features and Benefits: This additive significantly reduces the surface tension of coating systems, thereby improving substrate wetting and preventing cratering. Can increase surface slipperiness and improve gloss.
BYK-310 is a thermally stable silicone additive, which is different from traditional silicones. It is at 150 °C to 230 °C

Compared with silicone oil, this additive is safer to use. However, it should still be tested whether there will be foam stabilization problems in the corresponding system. Also test for recoatability and cratering propensity.

Adhesives and Sealants

Features and Benefits:BYK-310 is an efficient silicone additive. Significantly reduces surface tension, improving wetting of difficult-to-wet substrates.

Recommended Apps

Recommended for improving substrate wetting in epoxy adhesive systems wet.

recommended dosage

0.05-0.3 % Adjuvant dosage (as purchased) based on total formula.

The above data is the empirical dosage, the optimal dosage needs to pass a test series of tests determined.

Addition method and processing instructions

The additive can be added at any stage of the production process , can also be added later.

Special attention

Compared with silicone oil, this additive is safer to use. However, it should still be tested for other effects on adhesive performance.

room temperature curing plastic system

Features and Benefits:BYK-310 is an efficient silicone additive. Significantly reduces surface tension, improving wetting of difficult-to-wet substrates. The additive has high temperature thermal stability.

Recommended Apps

Recommended for use as primer for improving room temperature curing epoxy resin systems Wetting the material.

recommended dosage

0.05-0.3 % Adjuvant dosage (as purchased) based on total formula.

The above data is the empirical dosage, the optimal dosage needs to pass a test series of tests determined.

Addition method and processing instructions

The additive can be added at any stage of the production process , can also be added later.

Special attention

Compared with silicone oil, this additive is safer to use. However, it should still be tested whether surface defects occur in the respective systems.

/span>

The additive can be added at any stage of the production process , can also be added later.

Special attention

Compared with silicone oil, this additive is safer to use. However, it should still be tested whether surface defects occur in the respective systems.