BYK DISPERBYK 192 Wetting and Dispersing Additive

DISPERBYK-192

VOC-free and solvent-free wetting and dispersing additive for Liquid masterbatches for waterborne coating systems, printing inks and thermoplastics
Ingredients, and the production of colorants for unsaturated polyester systems or gel coats. Particularly suitable for the production of stable effect pigment dispersions.

chemical composition

Copolymer containing pigment affinity groups. VOC free (< 1500 ppm)

typical materialized data

The data given on this data page are typical values ​​only, not Product technical indicators.

Storage and Transportation

The product may freeze when the temperature is below 20°C . Warm to at least 30°C and stir before use.

Application field

room temperature curing system

Features and benefits:The additive deflocculates the pigment by steric stabilization. Due to the small particle size of the deflocculated pigments, the color intensity can be improved. In addition, due to the reduced viscosity, the amount of pigment added can be increased. The additive prevents floodingin complex pigment/colorant combinations and in very difficult colours.

Recommended use

Specially recommended for colorants used in the production of gel coats ; Also recommended for stabilizing pigments in gel coats.

Recommended dosage

Adjuvant dosage (purchase form) based on:

The above recommended dosage is for reference, the best The amount to be added needs to be determined through a series of experiments.

Joining method and processing guidance

Grinding should be in water or in the presence of grinding resin conduct. Pigments can only be added after the additive has been completely dispersed.

Thermoplastics

Recommended use

Auxiliary recommended for the production of fatty acid ester based liquids Color masterbatches for colored thermoplastics (especially PET).

Recommended dosage

Adjuvant dosage (purchase form) based on:

The above recommended dosage is for reference, the best The amount to be added needs to be determined through a series of experiments.

Joining method and processing guidance

For best performance, additive must be under agitation Slowly add to the carrier system. Pigments can only be added after the additive has been completely dispersed..

ica,sans-serif”>3-5 %

The above recommended dosage is for reference, the best The amount to be added needs to be determined through a series of experiments.

Joining method and processing guidance

For best performance, additive must be under agitation Slowly add to the carrier system. Pigments can only be added after the additive has been completely dispersed..