CAS 103-83-3/BDMA/Benzyldimethylamine

CAS 103-83-3/BDMA/Benzyldimethylamine

Overview:

Name: Dimethylbenzylamine

Alias: BDMA, N-dimethylbenzylbenzylamine, dimethylbenzylamine, benzyldimethylamine, catalyst BDMA, hard foam catalyst BDMA, N-benzyldimethylamine, BDMA, CAS 103-83-3, Dabco BDMA, Jeffcat BDMA, Lupragen N103, PC CAT NP60

Molecular formula: C9H13N;

Relative molecular mass: 135.20;

CAS No.: 103-83-3;

Colorless to slightly yellow transparent liquid, soluble in ethanol, soluble in hot water, slightly soluble in cold water;

Purity ≥99%;

Moisture ≤0.5%;

Viscosity (25℃): 90mPa.s;

Density (25℃): 0.897g/cm3;

Freezing point: -75℃;

Boiling range: 178-184°C;

Refractive index (25℃): 1.5011;

Flash point (TCC): 54°C;

Vapor pressure (20℃): 200Pa

Physical and Chemical Properties

Appearance Colorless to light yellow liquid.

Solubility Slightly soluble in cold water, soluble in hot water, miscible in alcohol, ether.

Melting point -75 °C

Boiling point 183-184 °C765 mm Hg(lit.)

Density 0.9 g/mL at 25 °C(lit.)

Refractive index n20/D1.501(lit.)

Flash point 130 °F

Storage conditions Flammables area

Water solubility 8 g/L (20 ºC)

BRN 1099620

Uses:

BDMA in the polyurethane industry is a catalyst for polyester-type polyurethane block soft foam, polyurethane rigid foam, polyurethane sheet and adhesive coatings, mainly used in rigid foam, can make polyurethane foam with good pre-fluidity and homogeneous vesicles, the foam body and the substrate between the adhesion of a better;

BDMA is mainly used in the field of organic synthesis as catalyst for synthesizing dehydrohalogen in organic drugs, corrosion inhibitor, acid neutralizer, accelerator for electron microscope section embedding;

BDMA is also used in the synthesis of quaternary ammonium salts, the production of cationic surface-active powerful bactericides and so on;

BDMA in epoxy resin, mainly used to promote the curing system of acid anhydride, polyamide, fatty amine, etc., to accelerate the curing of the product, widely used in epoxy resin electronic potting materials, encapsulation materials, epoxy floor coatings, marine paints as a curing accelerator;

Specific application examples of BDMA are: carbon fiber/monomolecular epoxy resin-based composite laminates, electrophoretic coatings for epoxy substrates, and dry transformer potting compounds;

Alias:

Dimethylbenzylamine Benzyldimethylamine BDMA 103-83-3 Dabco BDMA Jeffcat BDMA Lupragen N103 PC CAT NP60

Storage:

Should be sealed and stored in dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original packaging to prevent moisture and other substances from mixing and affecting the performance of the product. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.