Hot-melt pressure-sensitive adhesive SPH-5001 is suitable for bonding and bonding of automotive interior parts

Type : Hot melt pressure sensitive adhesive

Purpose : Suitable for bonding and bonding of automotive interior parts, including carpets, seat back panels, spare tire covers, sunroofs Attached to frame and ceilingpieces, etc.

Performance ：

①Good heat resistance

②For various substrates Good bonding performance, including tinplate, ASS, PP and other materials

③No irritating smell, Environmental protection

Technical parameters

Operation tips

①Before applying glue, base The surface of the material must be dry, clean, dust-free and oil-free;

② Apply glue strips as needed , spraying or roller coating;

③ The higher the melt temperature , the lower the viscosity, the longer the open time, but the maximum construction temperature should not exceed 210°C;

④Winter construction should pay attention to the base The temperature of the substrate should not be lower than 15°C when gluing, otherwise the bond test should be carried out first.

Packaging and Storage

Packing: 12kg/box

Storage: at 5-35 ℃ environment, the product can be stored for 24 months

Data Foundation

Described in the product data sheet All data are obtained in laboratory tests. Actual measurements may vary due to circumstances beyond our control.

Important Note

For related transportation, operation, For storage and chemical handling information and recommendations, users should refer to the actual Safety Data Sheet, which includesIncludes physical, ecological, toxicological and other safety-related data.

Legal Notices

When the product is in normal condition When it is correctly stored, processed and constructed, the information provided by Haoyi New Material Company and the construction given according to the actual situationProposals are based on the good faith of Haoyi New Material Company in its current knowledge and experience. In practical application, due to the materials and substrates usedIt is different from the actual site conditions, so it cannot be inferred from the information here or any written recommendation or any other suggestion. Make no warranty and assume any legal responsibility for the merchantability and suitability of the product for a particular purpose. Users of the product should test whether the product is is suitable for its application and purpose. Haoyi New Material Company reserves the right to change the nature of its products. The use rights of third parties shall be respected. All ordersCurrent terms of sale and delivery apply. Users should refer to the latest version of relevant product manuals, which can be provided by Haoyi New Material Company upon request.

span>Subject to current terms of sale and delivery. Users should refer to the latest version of relevant product manuals, which can be provided by Haoyi New Material Company upon request.