Hot-melt polyurethane adhesive SPH-8001 is suitable for bonding and bonding of automotive interiors, and assembly of home appliances

Type : Hot melt polyurethane adhesive

Purpose : suitable for lamination of automotive interiors such as door panels, armrests, seat back panels, etc.

Suitable for car roof and door panels , carpet, spare tire cover, etc.

Home appliance assembly, furniture, doors and windows , crafts, etc.

Performance ：

① Fast curing, high strength

②No smell, no solvent Volatile

③ Bonding to the substrate Good sex

Technical parameters

Construction conditions

1. Surface treatment: sticky The junction surface should be clean, dry, free of grease, oil and dust;

2. Glue: Use Hot melt glue pump or glue gun for glue

Note

1. High temperature during use , to avoid burns;

2. Use process interruption, It is necessary to reduce the heating temperature to below 100 degrees;

3. After use or replacement When gluing, care should be taken to prevent moisture from entering and blocking the gluing equipment.

Packaging and Storage

Packing: 20L/Keg ,200L/barrel

Storage: in 5-30 ℃ environment, unopened products can be stored for 9 months, avoid high temperature.

Data Foundation

Described in the product data sheet All data are obtained in laboratory tests. Actual measurements may vary due to circumstances beyond our control.

Important Note

For related transportation, operation, For information and recommendations on storage and handling of chemicals, users should refer to the actual Safety Data Sheet, which includes physical, ecological, toxicological and other safety-related data.

Legal Notices

When the product is in normal condition When being stored, processed, and constructed correctly, the information provided by Haoyi New Material Company and the construction treatment suggestions given according to the actual situation are based on Haoyi New Material Company’s good confidence in its current knowledge and experience. In actual application, due to the difference of materials, substrates and actual site conditions, it cannot be inferred from the information here or any written recommendation or any other suggestion that Haoyi New Material Co., Ltd.’s commerciality and support for its products Makes no warranties and assumes no liability of fitness for a particular purpose. Users of the product should test the suitability of the product for their application and intended use. Haoyi New Material Company reserves the right to change the nature of its products. The use rights of third parties shall be respected. All orders are subject to current sales and shipping terms. Users should refer to the latest version of relevant product manuals, which can be provided by Haoyi New Material Company upon request.

break, need to lower the heating temperature below 100 degrees;

3. After use or replacement When gluing, care should be taken to prevent moisture from entering and blocking the gluing equipment.

Packaging and Storage

Packing: 20L/Keg ,200L/barrel

Storage: in 5-30 ℃ environment, unopened products can be stored for 9 months, avoid high temperature.

Data Foundation

Described in the product data sheet All data are obtained in laboratory tests. Actual measurements may vary due to circumstances beyond our control.

Important Note

For related transportation, operation, For information and recommendations on storage and handling of chemicals, users should refer to the actual Safety Data Sheet, which includes physical, ecological, toxicological and other safety-related data.

Legal Notices

When the product is in normal condition When being stored, processed, and constructed correctly, the information provided by Haoyi New Material Company and the construction treatment suggestions given according to the actual situation are based on Haoyi New Material Company’s good confidence in its current knowledge and experience. In actual application, due to the difference of materials, substrates and actual site conditions, it cannot be inferred from the information here or any written recommendation or any other suggestion that Haoyi New Material Co., Ltd.’s commerciality and support for its products Makes no warranties and assumes no liability of fitness for a particular purpose. Users of the product should test the suitability of the product for their application and intended use. Haoyi New Material Company reserves the right to change the nature of its products. The use rights of third parties shall be respected. All orders are subject to current sales and shipping terms. Users should refer to the latest version of relevant product manuals, which can be provided by Haoyi New Material Company upon request.