Covestro Desmocap® 11 heat-activated TDI curing agent Adhesive curing agent Epoxy flexibility modification

Products Introduction
  A branched polymer containing ether and urethane groups, also containing cross-linkable blocked isocyanate groups. Raw material for improving the flexibility of epoxy resins and preparing elastic coatings and sealants

Supply Form
  Solvent-free high-viscosity liquid

Specifications

Other Data*

<td style="background-color:#ffc00

*This data is general information and is not part of the product manual.

Features /app
Desmocap® 11 can be used to prepare curable liquid solvent-free polyurethane system. Polyamides, often mixed with epoxy resins, are ideal curing agents. Best results are obtained when used together with cycloaliphatic diamines (such as Laromin® C260, Ancamin® XT, TCD-diamine, xylylenediamine, etc.). When mixed with epoxy resins, Desmocap® 11 acts as a reactive toughener.

Phase Capacitance                                                       />
In general, Desmocap® 11 is well compatible with liquid epoxy resins, tougheners and many liquid amines.

dissolve Sexuality/Dilution
Generally, Desmocap® 11 has good compatibility with esters, ketones, ethers, aromatics, various tougheners, turpentine and Kristallöl® 60 (turpentine). However, the storage stability of its diluted solution still needs to be tested. Polyurethane grade solvents should be used (less than 0.05% water) and should not contain reactive groups. Long-term storage of low solid content solutions may cause turbidity and precipitation.

Save
– Store in original Covestro airtight containers.
– Recommended storage temperature: 10-30°C.
– Avoid moisture, heat, and foreign substances.

General Information: This product should always be stored in its original in an airtight container. Storage at elevated temperatures may result in an increase in viscosity.

Save Time
When the product is stored in full compliance with the requirements of the “Storage” clause above and handled properly, The product complies with the specifications or characteristic values ​​stated in the above clause “Specifications or characteristic values” (as applicable) within 6 months from the date of shipment stated on the transport document. If the product exceeds the above-mentioned 6-month period, it does not mean that it no longer meets the set values ​​in the specifications or characteristic values. However, it is recommended that products older than 6 months from the date of shipment be tested before use to confirm that they still comply with the values ​​set in the specifications or characteristic values. The manufacturer does not make any promises for products that have been shipped more than 6 months from the date of shipment, and does not assume any responsibility and liability for non-compliance with specifications or set values ​​​​in the characteristic values.

Security      
  This product data sheet applies only to the latest version of the corresponding safety document. Any updates to safety-related information consistent with legal requirements will only be reflected in the Safety Data Sheet, which will be updated and published. Information on current classification and labelling, application and process methods, and further safety data can be found on the latest valid safety data sheet.