Covestro Bayhydrol UV 2282 Waterborne UV-curable polyurethane dispersion Good wood grain wetting

Product Specifications

Compatibility
Solubility/Dilution
  Bayhydrol® UV 2282 can be diluted with water.

Bayhydrol® UV 2282 generally has good compatibility with many acrylic dispersions, UV curable products and polyurethane dispersions such as Bayhydrol® XP 2593/1. These mixtures should be adjusted to a pH above 6.7 with triethylamine. Bayhydrol® UV 2282 can be matted with standard matting agents. Matting agent and additives can be directly dispersed in the base material in the disperser.

Application
Bayhydrol® UV 2282 is used to prepare high-quality waterborne UV-curable coatings, mainly used in wood coatings, which can make the coating film meet the resistance requirements of DIN 68 861-1B. After the water has evaporated, the coating is self-drying and can be sanded. The coating film after UV curing (10m/min/80W/cm lamp) has superior performance. The requirement for photoinitiator is low, 1-2% is enough. (by weight, based on solid base). Coatings based on Bayhydrol® UV 2282 have good adhesion to various substrates including plastic substrates. In order to further improve the adhesion of the coating film and eliminate “shadow curing”, Bayhydrol® UV 2282 and curing agent Bayhydur® VP LS 2336 can be used to prepare dual-cure coating systems.

Save
Stored under suitable conditions between 10-30°C, the storage stability of this product is at least 6 months. This product is sensitive to freezing.

Safety: Hazard Identification
Harmful to aquatic life and may cause long-term adverse effects in the aquatic environment.

ft:0.0000pt; margin-right:0.0000pt; text-align:left”> Save
Stored under suitable conditions between 10-30°C, the storage stability of this product is at least 6 months. This product is sensitive to freezing.

Safety: Hazard Identification
Harmful to aquatic life and may cause long-term adverse effects in the aquatic environment.