Check the solubility: Take 500 grams of water at about 5 degrees, and take 5 grams of lubricant, stir for 1 minute, stop for 3 minutes, stir again for 1 minute, check whether the pump lubricant is completely dissolved and whether Caking etc. A good pump moisturizer can be completely dissolved and rendered. How to choose a good quality pump lubricant: 1. Choose a qualified manufacturer to order. The pump lubricant is composed of a variety of polymers. The general shelf life is two years. When purchasing, please pay attention to the production date. 2. Purchase products with good packaging. The packaging must be waterproof. If the packaging is damaged, be careful when purchasing, because the lubricating agent will dissolve when exposed to water and cannot be used regularly. 3. How to check the effect of lubricant, first take a steel pipe with a diameter of 130mm, block one end of the steel pipe with an object, then pour the prepared lubricant solution into the steel pipe, and moisten the pipe in a short time Pour out the solution and use a steel pipe. If there is an obvious feeling, it is a qualified product.
Anhui polymer pump lubricant manufacturer should take the required amount of clean dissolved water into the container before concrete pumping construction, then add the pump truck lubricant, and stir while adding it. Dissolve everything, then let it sit for 3-5 minutes, stir again and use. When using a truck pump to pump concrete, pour the prepared Pump Runtong solution into the hopper along the hopper of the pump truck, and then start pouring concrete into the hopper. After the concrete covers the feed port of the delivery pump, pressurization can begin. Pumping concrete and ready-mixed mortars. The same applies when using floor pumps and mortar pumping equipment.
</p
微信扫一扫打赏
Chinese