HDI Manufacturer | HDI Factory | High Quality HDI Products – chemhdi.com Knowledge Concrete drag pump lubrication fluid Xinjiang polymer pumping fluid 300g a bag Henan lubrication agent manufacturer

Concrete drag pump lubrication fluid Xinjiang polymer pumping fluid 300g a bag Henan lubrication agent manufacturer

Key points for use: 1. First, ensure that the pump pipes and connecting parts of the truck pump, ground pump, and mortar pump are sealed and have no leakage points; 2. After checking the pump pipes of the pump truck, flush the pump with clean water to ensure that there are no residues in the pump pipes. , debris and other blockages; 3. When pumping concrete, the pump truck lubricant solution should be outside the concrete formwork first, and remember not to pour it into the concrete structure; 4. After the concrete pump and ready-mixed mortar pump complete the pumping, it should be Rinse the pump pipe and pump truck with clean water; 5. Wear protective glasses when using this product. If the product solution is accidentally sprayed into the eyes, rinse immediately with plenty of water. Concrete drag pump lubrication fluid, polymer pumping fluid 300g per bag

Pump truck lubrication agent can significantly improve the concrete pumping capacity, pipeline and pipeline resistance, significantly improve the service life of the pump pipe, and completely replace the pump mortar , process, shortening operation time, and has the advantages of rust prevention, speed, convenience, environmental protection, and money saving. Using the Pump Runtong product once can save about 230 yuan in pump mortar and transportation vehicle costs. Calculated based on an annual output of 200,000 cubic meters of concrete and 100,000 cubic meters of ready-mixed mortar. If the pump is opened 2,600 times a year, approximately 2,600 yuan can be saved per year. 600,000 yuan. Because the strength level of pump mortar is different from that of concrete, it is generally mainly used for pump lubrication and has little other uses. Some construction units use pump mortar in places that do not require high strength, such as floors, construction site floors, etc. The cost of pumping mortar is a huge waste if it is paid by the concrete company or the construction unit. At the same time, pump mortar also brings some hidden dangers. In the past, there have been serious accidents in some construction sites where pump mortar was used on structural parts, resulting in unqualified project acceptance and eventual demolition.

</p

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.chemhdi.com/archives/7298

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search
zh_CNChinese