What is a pipe moisturizer? Concrete pipe moisturizer formula. Pump truck pipe moisturizer price.

Lubricant is a new material used to replace water and mortar to moisten the pump and pump pipes before pumping. For example, the lubricant produced by Anhui Yulong is divided into ordinary type and high-efficiency lubricant specially designed for ground pumps. The length of the lubrication pipe of the special type of ground pump lubricating agent can reach more than 200m; every 500g can replace 1.5 ~ 2m3 sand paddle and the lubrication pipe can be 100m. This product is a white powder. At room temperature, the lubricant: water = 1:100~1:120. It can be quickly dissolved by mechanical or manual stirring for 3~5 minutes to form a viscous solution.

In order to prevent moisture residue and allow the lubricant to fully lubricate the pipeline, place a sponge ball at the feed port before unloading the pump bucket, start the pump to pump at low pressure and speed, and wait until the lubricant is about to be pumped When finished, unload the concrete and use concrete to push the lubricant along the pipe. The lubricant can form a l~2mm lubricating layer in the pump pipe, which is beneficial to the passage of concrete. A small amount of lubricating agent residue discharged from the front end of the pump pipe can be discharged outside the formwork. Because the amount is very small and alkaline, it is harmless even if mixed into the concrete mixture.

This product is a green and environmentally friendly product. After use, it can also increase the wear resistance of the pump tube wall by 15%. The use of lubricating agent can reduce the amount of lubricating mortar and eliminate the need for vehicles to transport water and mortar, which reduces fuel consumption and environmental pollution. Moreover, the cost of lubricating agent is low, about 1/8 of that of mortar. It is an energy-saving and consumption-reducing product worth promoting.

</p