China’s largest concrete pump truck lubricant supplier Beijing lubricant manufacturer Tianjin Pump Runtong

Anhui Yulong pipe moisturizer hotline: 18055268997. Yulong pump truck lubricant, also known as pump lubricating agent, is an emerging pump lubricating product. It replaces traditional pump lubrication mortar, reduces pump pipe friction, shortens construction period, and saves construction costs. It is a very environmentally friendly concrete pump truck raw material.

Model: JH-RB Specifications: 300g per bag Certification: CCC

Pump truck lubrication Pipe agent is a new product currently appearing in the concrete market. Its main function is to lubricate the pipes of the pump truck before pumping ready-mixed concrete to avoid clogging of the pump. In the past few decades, the ready-mixed concrete industry across the country has been using water and mortar to lubricate concrete pumps. The result is neither economical nor in line with the current concepts of low-carbon environmental protection, energy conservation and emission reduction. The successful development and application of pump truck lubricant has made a positive contribution to the low-carbon, energy-saving and emission reduction of the concrete industry.

Scope of application

Pump truck lubricant products are suitable for pumping concrete and various Pump lubrication for on-site pump pipes of dry mortar. It has good adaptability to various grades of concrete and completely replaces the pump mortar of various pump pipes. Pump Runtong products can avoid pump clogging accidents of concrete pumps and on-site mortar pumps, reduce transportation vehicles, improve equipment utilization, and reduce the usage costs of enterprises using ready-mixed concrete and ready-mixed dry mortar. The use of pump truck lubricant products saves time, effort and worry, and is an excellent new pumping construction technology.

Product Features

Pump The lubricating agent can greatly improve the concrete pumping capacity, reduce pipeline friction and pipeline resistance, greatly extend the service life of the pump pipe, completely replace the pump mortar, reduce the process, shorten the operation time, and has the characteristics of rust resistance, fast and Convenience, environmental protection, money saving and other advantages. Using the Pump Runtong product once can save about 230 yuan in pump mortar and transportation vehicle costs. Calculated based on an annual output of 200,000 cubic meters of concrete and 100,000 cubic meters of ready-mixed mortar. If the pump is opened 2,600 times a year, approximately 2,600 yuan can be saved per year. 600,000 yuan.

How to use

Before concrete pumping construction, follow the requirements Pour clean dissolved water into the container, then slowly add the pump lubricant, stir while adding until all is dissolved, then let it sit for 3-5 minutes, stir again and use. When using a truck pump to pump concrete, slowly pour the prepared Pump Runtong solution into the hopper along the inner wall of the pump truck hopper, and then start to slowly pour concrete into the hopper. After the concrete covers the feed port of the delivery pump, you can Start pumping concrete and ready-mixed mortar under pressure. The method is the same when using ground pumps and mortar pumping equipment.

Pump truck lubricant dosage preparation table

Length of delivery pump tube Product dosage Dissolved water Dosage

Below 50 meters 1 bag 30±2kg

50 meters-100 meters 2 Bags 60±5kg

100-200 meters 3-4 bags 140±10kg

Key points for use

1. First, the pump pipes and connecting parts of the vehicle pump, ground pump, and mortar pump must be sealed without leakage points;

2. After checking the pump pipe of the pump truck, flush the pump with clean water to ensure that there are no residues, debris and other blockages in the pump pipe;

3. When pumping concrete, the lubricant solution from the pump truck should be discharged outside the concrete formwork first, and remember not to pour it into the concrete structure;

4 , after the concrete pump and ready-mixed mortar pump are pumped, the pump pipes and pump trucks should be flushed with clean water in time;

5. Wear protective gear when using this product Glasses. If the product solution is accidentally sprayed into the eyes, rinse immediately with plenty of water. </p