Principle Research
Concrete anti-segregation agent, also known as adsorbent. During the production of the mixing station, material fluctuations will cause changes in the amount of admixtures and moisture content required for the material. When overadmixture occurs, concrete segregation and bleeding will occur. Causes the slurry and aggregate to separate, causing pipe blockage. Anti-segregation agent for concrete, developed and designed based on the principle of admixture water-reducing chain. Add anti-segregation agents after segregation occurs in concrete. The anti-segregation agents will quickly destroy the admixture water-reducing chain, thereby returning the concrete slump to normal.
Technical performance
1. After adding this product according to the degree of concrete segregation on site, stir for 5 -In about 10 minutes, the concrete can be restored to its normal state.
2. Just add 1-2 kilograms to 10-16 cubic meters of concrete. It can also be increased or decreased appropriately according to the degree of on-site segregation. If the tanker is too big and the mixture is not evenly stirred, you can add half of the mixture first and then add the other half after the tanker is half full.
3. This product will not change the water-cement ratio, so it will not reduce the strength of concrete. Adding it in excess will greatly increase the early strength of concrete.
<img src="/upfile/202304/2023041334528065.jpg"/
微信扫一扫打赏
Chinese