What are the details that need to be paid attention to when using lubricant on floor pumps? Shandong lubricant manufacturer Qingdao concrete lubricant

At present, driven by the Internet, the lubricant market can be said to be full of chaos, with all prices and qualities available. As the saying goes, what you buy is not what you sell. This is absolutely true. In order to compete for buyers, many merchants lower the quality of the lubricant and attract buyers with low prices. Some customers who are greedy for cheap are blinded by the price and only look at the price without considering the quality of the lubricant. When they receive it, When I started using the moisturizer, I realized that was not the case! The purchased lubricant had no lubricating effect and could barely be used on the sky pump. The prototype appeared as soon as it arrived at the ground pump. For example, the quality of the lubricants produced by some large and regular manufacturers is good, and the prices are generally slightly higher than those of small workshops, but the effects are completely different. If you want to save costs by using pump truck lubricant, you must first purchase regular and qualified pump truck lubricant. This is the prerequisite for not blocking the pipe.

Second point: The pump pipe must be flushed

The pipeline is relatively long and has many turns. This is a characteristic of ground pump pipelines. Many workers directly flush the pipelines with water after the construction is completed, without using sponge balls. The stones in the pipelines are not completely flushed out, but remain in the bends. In this case, the original cement mortar can be used to moisten the pipe to remove the stones. However, after the pump truck lubricating agent is prepared and the solution is prepared, it is difficult to remove the stones. If there are many stones at the elbow, It is very easy to cause pipe blockage, so when using pump truck lubricating agent instead of cement mortar to moisturize pipes, the prerequisite is that sponge balls must be used to clean the pipes during the previous construction, and there should not be a large amount of stones left in the pipes. </p