HDI Manufacturer | HDI Factory | High Quality HDI Products – chemhdi.com Knowledge How to Eliminate Concrete Bubbles Revealing the Top Ten Methods to Eliminate Concrete Bubbles

How to Eliminate Concrete Bubbles Revealing the Top Ten Methods to Eliminate Concrete Bubbles

How to eliminate concrete bubbles? Concrete has the characteristics of rich raw materials, low price and simple production process, so its usage is increasing. At the same time, concrete also has high compressive strength. It has the characteristics of good durability and wide range of strength levels. So below, we will introduce the method of eliminating bubbles in concrete!

How to eliminate concrete bubbles

How to eliminate concrete bubbles

1. Choose a reasonable gradation to make the ratio of coarse aggregate and fine aggregate moderate.

2. Check the materials well, strictly control the size of the aggregate and the content of needle-like particles. Carefully screen when preparing materials to eliminate unqualified materials.

3. Strive to reduce the deviation between actual production and experiment.

4. During the construction process, the moisture content of materials must be tested in a timely manner. Each truck of aggregate should be weighed. If electronic measurement can be used, the effect will be better. It is best to adopt quality ratio control and adjust the on-site mix ratio at any time to prevent large deviations in water usage and sand rate.

5. Choose an appropriate water-cement ratio. You can do several groups in the laboratory and compare them with each other to choose the best one.

6. On the premise of ensuring the strength of concrete, it is recommended to use cement with a lower grade or smaller deviation in relevant physical and technical performance indicators to increase the amount of cement. .

7. Pay great attention to the vibration of concrete.

8. As mentioned in the previous mechanism analysis, it is necessary to select appropriate vibration equipment, optimal vibration time, reasonable vibration radius and frequency, and insert The vibrator should be inserted quickly and unplugged slowly.

9. The template should be kept smooth and the release agent should be applied evenly but not too much or too thickly.

10. Choose external admixtures and cement with excellent chemical composition.

How to eliminate concrete bubbles

Summary: Ten methods for eliminating concrete bubbles, temporarily This is the introduction for everyone. If you have any other questions or don’t understand anything about it, you can directly consult our professional staff. You are also welcome to call us for consultation!

</p

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.chemhdi.com/archives/7771

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search
zh_CNChinese