The correct way to use concrete sealing and curing agent

1. The name of concrete concrete curing agent

Concrete concrete curing agent is also called concrete sealing hardening Agent, concrete curing agent, epoxy floor sanding modifier, concrete floor hardener, epoxy floor penetrating agent, etc., the epoxy floor after the application of concrete curing agent is also called : Hardened floor, hardened floor, explosion-proof glass epoxy floor, polished concrete, mirror glass epoxy floor, armored epoxy floor, armored epoxy floor, etc.

2. Types of concrete concrete curing agents

According to the ingredients of concrete concrete curing agents It can be divided into: sodium-based concrete curing agent, potassium-based concrete curing agent, and lithium-based concrete curing agent. Sodium-based and potassium-based are products from a long time ago. These two ingredients have been gradually replaced by the market. Whether it is thermal insulation or product effect, lithium-based concrete curing agent is the best. selection.

3. Characteristics of concrete concrete curing agent

Hard and wear-resistant: concrete curing agent It reacts with the chemical substances in the concrete to produce soft substances, which blocks the structural porosity in the concrete and greatly improves the hardening and wear resistance of the concrete surface.

Effective sealing: The concrete curing agent penetrates into the concrete to form a high-density overall, blocking liquid and liquid residue from entering the concrete.

Easy maintenance: In the later stage, the floor can be mopped directly with cold water. It is easy to clean and does not require polishing and waxing, which reduces high maintenance costs.

Safe production: concrete concrete curing agent, crystalline, odorless, non-toxic, water-soluble green and environmentally friendly product.

Strong permeability: Excellent permeability, can penetrate 5-8 mm of concrete.

Resistant to chemical corrosion: Epoxy floors treated with concrete-density epoxy curing agents can prevent chemicals from entering the concrete.

Completely anti-fouling: The concrete curing agent reacts exothermically with the salt in the concrete to increase surface compaction and effectively prevent dust from being generated on the concrete surface.

Aging resistance: Not easy to turn yellow and resist whitening problems. The usual application period is more than 40 years.

Suction function: Allows gas and liquid to circulate freely, preventing the problem of peeling and micro-cracks on the road surface.

Permanent gloss: After treatment with concrete curing agent, the road surface will have a polishing effect, and the longer it is used, the higher the visual effect will be. The hard road surface becomes brighter and brighter with constant friction during use.

4. Application scope of concrete concrete curing agent

Concrete concrete curing agent is suitable for cement floors , emery wear-resistant floor, terrazzo floor and other epoxy floors based on concrete. Hardened floor systems are used in: underground garages, industrial workshops, warehouses, logistics centers, shopping malls, exhibition centers, airports, high-speed rail subway entrances and other places.

5. Engineering construction methods of concrete concrete curing agent

1. Engineering construction of concrete concrete The first step in applying the curing agent is to polish the concrete reference point. Polishing is an important factor that determines the quality of the flooring project. The purpose is to open the pores of the concrete so that the concrete curing agent can fully penetrate into the pavement and exert its effect. Clean and clean the surface of the rural base layer to remove dust, oil stains and other substances that are unfavorable for bonding. If the old rural base layer has too many potholes, it must be smoothed out in advance. If the foundation of the road surface is relatively good, you can only clean and wash the surface in time without polishing the foundation of the road surface.

2. According to the condition of the road surface, mix the concrete curing agent raw materials of good brand concrete in proportion.

3. Spray the prepared concrete curing agent raw materials evenly on the road. Before applying the raw materials, make sure the road surface is completely dry. . Areas that dry out quickly need to be mopped with water scrapers or mops to keep the road surface wet for 3-4 hours.

4. When the surface and material are 80% dry, sprinkle epoxy curing agent material, and start using a grinder to replace the 60# The grinding disc grinds the road surface. After grinding, use a vacuum cleaner to clear and wash the road surface. Then use 150, 150, and 600 mesh grinding discs to grind and polish the road surface respectively. The raw material water must be applied before polishing. After polishing, clean it with a vacuum cleaner.

5. Sprinkle cold water on the road surface, and then use 1500 and 3000 mesh grinding discs to grind the road surface. and clear and wash the road surface.

6. Sprinkle penetrating brightener, let it soak for about 30 minutes, and then use a scouring pad to dry polish. The longer the application, the greater the smoothness.

</p