SKYBON ES-100 Saturated Polyester Resin

Application
1. Screen printing binder
2. Membrane composite
3. Binder, adhesion promoter

Features
1. Suitable ink binder
2. Excellent adhesion
3. FDA certified CFR 175; 175.300 and 176.170

Performance

Dissolution method
1. Put all solvents in the reactor.
2. While stirring, put the ES-100 solid into the reactor.
3. After adding all components, raise the temperature of the reactor to 90~100 degrees . If MEK and acetone are used, the reactor temperature is raised to 50-60 degrees. Stir for two hours. Reactor maximum pressure: 2kg/cm²
4. Turn off the heating system. Stirring was continued for one and a half hours, allowing the reactor to cool naturally.
5. Stop stirring, filter the solution, and put it into a 200kg bucket.

Solvents used
MEK, Toluene, Xylene, SOLVESSO, Cyclohexanone, Cellulose Acetate, Isophor Ketones, DBE

Packaging
25kg/bag;14MT/FCL

�� Filter the solution and put it in a 200kg barrel.

Solvents used
MEK, Toluene, Xylene, SOLVESSO, Cyclohexanone, Cellulose Acetate, Isophor Ketones, DBE

Packaging
25kg/bag;14MT/FCL