Type |
Aliphatic and Aromatic Isocyanate Polymers in Ethyl Acetate |
Form of Supply |
about40% ethyl acetate solution |
Appearance |
Colorless to pale yellow liquid. Color does not affect bonding performance |
Nature
Desmodur® (Desmodur®) RN is used as a cross-linking agent for Desmocoll® (Desmocoll ®), natural or synthetic rubber-based adhesives, especially suitable for light-colored adhesives for bonding rubber materials. Cooperating with appropriate adhesives can ensure minimal discoloration under light conditions.
Features
Features |
Value |
Measurement unit |
Method |
NCOContent |
7.2±0.3 |
% |
DIN EN ISO 11909,Annex A |
Other parameters*
Features |
Value |
Measurement unit |
Method |
Non-volatile content |
about40 |
% |
DIN EN ISO 3251 |
density (20℃) |
about1.04 |
g/cm3 |
DIN 53 217/5 |
Viscosity (23℃) |
about11 |
mPa·s |
DIN EN ISO 3219 |
Solvent |
ethyl acetate |
|
|
Flashpoint |
–5 |
℃ |
DIN 51 755 |
*The above data are only general information and is not a characteristic property of the product.
Apply
Add After Desmodo® RN, the two-component adhesive must be used within the pot life. The pot life is not only related to the polymer content in the adhesive, but also to other components (such as resins, antioxidants, plasticizers, solvents, etc.). When the pot life is approaching, usually a few hours or a working day, the adhesive becomes It is more difficult to apply, and the viscosity will increase rapidly. Eventually, an irreversible gel occurs.
Amount of crosslinking agent needed for adhesive You can refer to the following data:
100 Parts by mass adhesive Desmodo® RN dosage
de Smoco® (Hydroxy Polyurethane)
( Polyurethane content about 20%) 4-7
Bayer Flat® (Neoprene)
(rubber content about 20%) 4-7
Packaging
metal Bottled: 0.75 kg 1L bottle
Save
in Stored in airtight original packaging at 23°C, the product has a shelf life of 6 months.
all Desmodeo® products are sensitive to moisture conditions, and react with water to produce carbon dioxide and insoluble urea, so the container must be tightly closed. The introduction of water in any form (wet containers, aqueous solvents, humid air) should be avoided, otherwise the carbon dioxide produced may lead to a dangerous increase in pressure in the container.
Exposure Yellowing will be accelerated under air or light, but it has no effect on the basic performance of the product.
Disposal
useless The product residues should be incinerated according to local regulations and should refer to the European Waste Catalog (EWC) for industrial waste code details. See Material Safety Data Sheet for details.
No In areas subject to German packaging regulations, carefully cleaned containers or packaging can be incinerated in local or industrial incinerators. For containers that have not been cleaned of pollutants, the hazard signs should be retained.
Safety: Hazardous Nature
height flammable. Harmful if inhaled. Eye irritation. Inhalation may cause sensitization. Repeated exposure may cause skin to dry out or crack.
Safety Data Sheet (887947), including product identification, transportation, storage , and information on product-related handling, safety and ecology, please refer to.
an style=”font-size:18px”> Disposal
useless The product residues should be incinerated according to local regulations and should refer to the European Waste Catalog (EWC) for industrial waste code details. See Material Safety Data Sheet for details.
No In areas subject to German packaging regulations, carefully cleaned containers or packaging can be incinerated in local or industrial incinerators. For containers that have not been cleaned of pollutants, the hazard signs should be retained.
Safety: Hazardous Nature
height flammable. Harmful if inhaled. Eye irritation. Inhalation may cause sensitization. Repeated exposure may cause skin to dry out or crack.
Safety Data Sheet (887947), including product identification, transportation, storage , and information on product-related handling, safety and ecology, please refer to.